• If you have just plugged your chair in, it will turn on and provide a flickering light like a campfire.  This indicates that the chair is on and in the process of heating up.
• If you connect to the chair with your phone, the app will indicate if the chair is on/off and what settings are in use. 

You sure can.  You have options:

• NO APP - special feature

Hover your iphone close just next to the logo, (some people say, touch the camera lens to the surface of the chair just next to the logo) Be patient in about 5 seconds your phone will recognize the chair and make a connection.  Giving you or any guest control of heat and light. 

• App for IOS or Android,

Get the Wrmth app from the app store for your iPhone and follow the simple instructions to connect it to your chair, or
Hover over the logo and when the card pops up select get app. 

• ANYWHERE CONTROL (IOS only for now)tm

Sign in to your account in the app,
Add your chair to the account
Provide WiFi credentials
Restart app and now you have ANYWHERE CONTROL

• FAMILY SHARING (IOS only for now)

Have your family member (or friend) create an account on the Wrmth App using email.
Add them to your Family sharing in the Wrmth app using the email address they registered with. 
They will now have ANYWHERE CONTROL too! 

• Your chair will flash blue for 10s after you connect your iPhone to it.
• The chair will stop flashing afterward, even though your phone remains connected.

• Before you do anything, check the connection of the chair's plug and ensure it is plugged in correctly.
• Make sure to turn on the Bluetooth on your device. To connect, unlock your phone and hover over the logo as described above, or open the app and click on “tap to scan the Wrmth logo” and then hover your phone over the Wrmth logo. You may need to move your phone around the logo a little to connect. Once connected, connect you will be brought into the chair page. 

• For a variety of reasons this may happen occasionally, perhaps you went inside to get a drink and took your phone out of range. Never fear.  Simply hit the retry button on your app, or reconnect by hovering over the logo and you will be good as new.

• UNLESS YOU HAVE SET UP ANYWHERE CONTROL
• The furthest you can go to maintain a strong connection to the chair is approximately 100m that is assuming that there are no interferences from your device to the chair.
• Certain obstacles that can interfere with the signal and make the range of connection shorter can be physical obstacles like walls, furniture, or other electronic devices.  These can sometimes cause you to lose your connection to the chair.

• There can only be one device(iPhone) connected to each chair at a time. If someone else hovers over the logo and connects to the chair, the current person connected will be disconnected and the control will pass to the new person. 
• This is slightly different with ANYWHERE CONTROL, the chair owner can "Take back" control without being in contact with the chair.

• The maximum temperature the chair can reach is controlled by the app and at this time is set to 44 Celsius (111.2 Fahrenheit). When you receive your chair, this is the default temperature setting.
• Wrmth chairs are designed to be outdoors year round,you can lower the temp in the app to the lowest setting and the chair will fall to match the ambient temperature
• If the ambient temp is below -15 Celsius (5 degrees Fahrenheit) you have reached the lowest operating temperature of the chair. The chair will be disabled below this ambient temperature automatically and will recover when the temperature rises above once again.
  

Why does my chair sometimes flash Blue and then stop?

• Your chair will flash blue for 10s after you connect your iPhone to it.
• The chair will stop flashing afterward, even though your phone remains connected.

• It may take a few minutes for the chair to go from 0 to 44 degrees Celsius.  While that happens all of the lights will flicker and simulate a warming fire.  Once the chair approaches the target temperature, the lights will go solid and begin a slow breathing effect. 
• Once the lights go solid, it may still take a few more minutes for the chair to completely settle at the temperature, this is normal.